Manuale dell'utente del cavo di prolunga della temperatura

Uso previsto e indicazioni per l'uso

Il cavo di prolunga della temperatura è progettato per il collegamento elettrico tra il monitor del paziente e la sonda di temperatura, indicato per l'uso nel monitoraggio non invasivo continuo della misurazione della temperatura. Sono completamente compatibili e destinati all'uso con le principali marche di monitor paziente.

Stoccaggio e manipolazione:

Quando non vengono utilizzati, i cavi devono essere avvolti in modo lento e conservati a temperatura ambiente. Non avvolgere i cavi attorno all'apparecchiatura per evitare di danneggiare i fili interni.

Condizioni operative:

  • Temperatura ambiente: da 0 a + 40 ° C
  • Umidità relativa: dal 15 all'85%
  • Pressione atmosferica: 86kpa ~ 106kpa

Stoccaggio e imballaggio:

These cables are individually packaged.
Cables must be stored in its original packaging and within the storage conditions to maximize their storage life.
Storage conditions are as follows:

  • Ambient temperature: -10 to +40°C
  • Relative humidity: 15 to 85%
  • Atmospheric pressure: 86kpa ~106kpa


This cable must be cleaned using a soft cloth moistened with soapy water or 70% isopropyl alcohol. Allow the cable to dry thoroughly before use. Do not use any abrasive agents or chemical product except 70% isopropyl alcohol.
Do not irradiate, autoclave, soak or immerse the cable in any kind of solution.

    Warranty and Liability

    Cables & Sensors offers 12 months warranty against defects in material or workmanship from the date of purchase. Our warranty does not cover the damage or breakage due to the abusive use or negligent care of the cable. We guarantee that the equipment conforms to the specifications of the safety and performance standards currently in force and applicable to it.


    1. Ensure the cable is physically intact, with no broken or frayed wires or damaged parts. Visually inspect the cable and discard if cracks or discoloration are found.
    2. Do not attempt to reprocess, recondition or recycle the cables as these processes may damage the electrical components, potentially leading to patient harm.
    3. Failure to properly connect the transducer or the cable to the patient monitor will result in intermittent readings, inaccurate results, or no readings.
    4. To avoid damage to the cable, always hold it by the connector rather than the cable when connecting or disconnecting either end.
    5. Always refer to the patient monitor operator’s manual for complete instructions or additional instructions.
    6. Carefully route cable and patient cable to reduce the possibility of patient entanglement or strangulation.

      U.S. federal law restricts this device to sale by or on the order of a physician.

      Symbol Explanation

      Catalog number
      Batch code
      Series number
      See instructions
      Date of manufacture
      Crossed out wheelie bin indicates separate treatment from general waste at end of life.
      Waste of Electrical and Electronic Equipment Directive (WEEE)
      Protection against moisture
      La legge federale degli Stati Uniti limita la vendita di questo dispositivo ai medici o su prescrizione medica.
      Rappresentante autorizzato per l'Europa
      Marchio CE